Tabla de contenido
Falling prevention
Safety wires (not supplied) are useful to prevent the speaker
from falling off the table.
Loop the safety wires (not supplied) into each hole as shown
and tie the safety wires to the LCD TV stand.
All manuals and user guides at all-guides.com
Speaker connections to TVs
Caution:
Turn off all other equipment before making any connections.
Tuner receiving for other audio system
Placing the aerial near the speaker AC power lead may cause
noise pick up. Place the aerial away from the speaker for
better reception.
Notes:
To connect to TV, use either LINE IN 1 sockets or AUDIO
LINE IN 2 socket only.
Refer the operation manual of the equipment to be
connected.
Fully insert the plugs to avoid fuzzy pictures or noises.
If the TV/monitor has an audio output, connect it to the LINE IN
1 sockets on the rear of the speaker.
Connecting to a TV
TV
To audio output sockets
RCA cable (supplied)
Speaker
HT-SB400_A6_EN.fm
2009 October 20
To LINE IN 1
sockets
AUDIO
AUDIO
RIGHT
RIGHT
LEFT
LEFT
LINE IN 2
LINE IN 2
LINE IN 1
LINE IN 1
DC IN
DC IN
HT-SB400
ENGLISH
E-10
Tabla de contenido
