Product Marking; Safety Precautions - TATRA TW.F50+DR Manual Del Usuario

EN
In addition to the information given here, the applicable local safety and hygiene
regulations must be observed. The knowledge of risk and safety statements contained in manual
ensure a reliable and proper use of the dishwasher.
The installation manual is considered to be part of the dishwasher and should be stored
next to it in a place accessible to anyone who will carry out the installation, maintenance or
cleaning of the dishwasher.
1.3. Obligations and warranty
New products are covered under a 12-month warranty. All the given data and
instructions are subject to standard safety instructions and current standard engineering
achievements.
If a special modification is ordered, the actual content of the supply may differ from the
descriptions and drawings given in this manual. This provision shall be also applied in the event
of a special order or modification of the device in accordance with new technologies. Each
product has a unique serial number.
The manufacturer assumes no responsibility for any damage or failure caused by the
following reasons, and the warranty becomes void.
•
Damage caused intentionally or negligently
•
Failure to follow the instructions listed in this manual
•
Operation of the device by unqualified persons
•
Using the equipment for other purposes
•
Changes made by the user independently
•
Use of non-original spare parts
1.4. Copyright protection
This manual including any texts, drawings, visual and other illustrations contained
therein, are subject to copyright protection. No part of this publication may be copied, transmitted
or used without the written permission of the manufacturer. Otherwise, compensation may
be claimed. All rights reserved.
2.

PRODUCT MARKING

•
To view the technical data, see the information on the product surface (nameplate).
•
Before starting, check the model of the dishwasher and the voltage in the power supply.
•
In case of non-compliance, contact the manufacturer or the supplier of the equipment.
When contacting technical support, please, provide the serial number given in the
nameplate, a sample of which is shown above.

SAFETY PRECAUTIONS

The equipment specified in this manual is designed in accordance with national and
international safety standards and is manufactured under control. For safe and reliable operation,
follow the rules below.
•
Do not allow power cables to come into contact with heat sources or sharp surfaces. •
The power cable must not hang from the work surface.
30