HURAKAN HKN-GF1000 Manual Del Usuario página 17

Attention! Before using the glass polishing machine, follow these
simple instructions. Failure to follow them may cause harm to the user's health or the machine:
Step 1
Before starting the machine, prepare a gas hose reaching the gas cylinder bottom allowing
to achieve the optimum cooling.
Step 2
Find the hood in the accessory bag, put it on the gas nozzle of the machine, and screw it on.
Attention! The machine only runs on liquefied carbon dioxide. Never
other high-pressure gases to the machine. A gas cylinder with a siphon tube is optimal for
feeding liquefied CO2. If you are using a standard CO2 cylinder, turn it upside down so the
liquefied CO2 flows out.
Install the machine in a well-ventilated area, otherwise, a high concentration of CO2 may be
generated.
Attention! Before disconnecting the gas hose, make sure to cut off the gas supply from the
cylinder and depressurize it so that the gas drains from the circuit.
Attention! Keep the machine away from fire, heating elements, and other power sources.
SAFETY
connect cylinders with
EN
17