Warranty Information - HURAKAN HKN-GF1000 Manual Del Usuario

EN
HKN-GF1000 120V 130x282x538 4.3 20-25 CO2
220-240V
50-60Hz

WARRANTY INFORMATION

The machine is intended for industrial and technical use, requires maintenance, and may only be
used for its intended purpose.
The user must ensure that the equipment is serviced by qualified technicians.
The warranty period should be checked with the Seller, but should be not less than 6 months
from the date of its sale as per the delivery note provided that the consumer has followed the
rules of operation, care, and maintenance set out in this manual.
The terms of the warranty are established by the Sales Contract between the Seller and the
Buyer, as well as by the applicable regulations of the country where this equipment is used.
If any manufacturing defects are found in the machine, contact the dealer that sold the
machine.
The warranty does not apply to:
1. periodic maintenance, adjustment, and setting up;
2. parts repaired or replaced due to wear and tear;
3. any changes made to improve or extend the normal scope of use of the machine specified in
this manual;
4. when the following malfunctions are detected:
• malfunctions caused by improper use of the machine, improper use for other purposes, or use
in a manner inconsistent with the instructions.
• malfunctions due to the intervention or repair by unqualified individuals;
• malfunctions caused by the use of substandard or low-quality consumables and spare parts.
• malfunctions associated with operating the product in environments with temperature,
humidity, ventilation, and vibration that are not recommended for this machine.
• malfunctions due to insufficient or untimely cleaning of the machine.
• malfunctions associated with inadequate qualification of maintenance personnel or incorrect
technological process.
• malfunctions associated with mechanical damage during improper transportation.
• malfunctions associated with foreign objects, liquid, smoke or steam in the product or its
mechanisms.
• malfunctions caused by accidents, natural disasters, exposure to animals, rodents, insects,
voltage and frequency fluctuations in the electrical mains.
• malfunctions caused by the improper connection of the machine electrical protection devices.
INSTALLATION AND SETTING-UP PROCEDURES
16