Before First Use; Cleaning And Maintenance - HURAKAN HKN-CFV90 Guia De Inicio Rapido

BEFORE FIRST USE

• Unpack the equipment, and remove all packing materials. Do not discard the documentation
included in the scope of delivery.
• Please read this certificate carefully.
• Wipe the equipment with a soft dry cloth.
• Wash all removable parts that come into contact with fruits and vegetables with warm soapy
water, then rinse thoroughly with clean water and dry.
OPERATION
• Make sure that the equipment is fully assembled and ready for operation.
• Make sure that the operation switch is in the "off" position.
• Plug in the power cord to the outlet and press the push button
• Place the prepared fruits and vegetables into the inlet opening in small portions, using the
pusher to help. To get the maximum amount of juice, the pressure on the pusher must be even
and not too strong.
• During operation of the equipment, the juice flows out of the bowl through the spout and into
the juice container, and the waste is fed through a wide opening.
• For convenience, the spout can be set in 8 different positions.
• All parts that come into contact with the juice are made of stainless steel.

CLEANING AND MAINTENANCE

1. Before cleaning the equipment, make sure that the power switch is set to "Off" and that the
unit is disconnected from the mains.
2. The body and lid of the device should be wiped with a soft cloth or rag.
3. If necessary, use a clean cloth with a small amount of detergent with a medium PH level. Never
put the motor compartment in water.
4. All parts of the juicer should be washed after each use. Do not use abrasives or rough brushes
for cleaning.
5. Make sure that the device is well cleaned before storing it.
6. When not in use for a long time, unplug the device from the mains supply and prevent dust,
moisture and insects from getting on it.
EN
9