Starting Setup; Important; Tv Operation - Hitachi LE32V407 El Manual Del Propietario

Starting setup

The Setup Wizard appears the first time you turn on the
TV, and assists you to specify the Air/Cable setting, and
program your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made.
1
To turn on the TV, press POWER. (POWER indicator on the
front of the unit changes white. It may take approx. 10 seconds
for a picture to appear on screen.) The Initial Setup Wizard
begins.
2
Press ◀ or ▶ to your desired language.
3
Press SELECT to go to the next step.
4
Select your "TV mode" by pressing ◀ or ▶ to select "Home
Mode" or "Retail Mode". This product qualifies for ENERGY
STAR in Home Mode with its default settings.
5
Press SELECT to go to the next step.
6
Press ◀ or ▶ to choose your time zone, then press SELECT.
7
Press ◀ or ▶ to select daylight saving time "On" or "Off" by
pressing SELECT.
• In the rare event that you live within broadcast range of two
stations in two different time zones, the TV may recognize
the wrong station for the auto clock set.
8
Press ◀ or ▶ to select signal type (Air/Cable) that you using,
then press SELECT.
9
Press SELECT to "Start Scan", then Auto Channel Scan will
begin. After the scan is completed, a TV channel appears on
the screen.
• Depending on the reception condition, it may take up to 30
minutes to complete scanning channels. Please allow the
process to complete without interruption.
All manuals and user guides at all-guides.com

TV operation

1
2
3
4
VHF/UHF/CABLE CHANNELS
NOTE:
• If a channel with no broadcast is selected, the sound will
• It may take a few seconds for a digital channel picture to appear
To select the video input source
To view a signal from another device connected to your TV, such
as a VCR player, press INPUT, then press ▲ or ▼ to select the
desired input, then press SELECT.
To turn on the TV, press POWER. (POWER indicator on the
front of the unit changes white. It may take approx.10 seconds
for a picture to appear on screen.)
Adjust the volume level by pressing VOL (VOLUME) + or – .
The volume level will be indicated on the screen by a volume
bar.
If the volume increases, the number of bars also increases.
If the volume decreases, the number of bars also decreases.
Set the Source option to the appropriate selection (see "Air/
Cable selection" on page 18).
Press the Direct Channel Selection Buttons (0-9, –) to
select the channel.
TO SELECT ANALOG CHANNELS
1-9: Press 1-9 as needed. Example, to select channel 2,
press 2, then press SELECT..
10-99: Press the 2 digits in order. Example, to select
channel 12, press 1, 2, then press SELECT.
100-135: Press the 3 digits in order. Example, to select
channel 120, press 1, 2, 0, then press SELECT.
TO SELECT DIGITAL CHANNELS
Press the first digits, then press the – button followed by the
remaining number.
Example: To select channel 15-1, press 1, 5, –, 1, then press
SELECT.
• If a channel is selected with only audio content, "Audio
Program" will be displayed on the screen.
• If a channel is selected with a weak digital signal, "No Signal."
will be displayed on the screen.
• The same program may be available on either an analog
channel or a digital channel. You may choose to watch
either format.
Air Cable
VHF VHF
2-13 2-13
UHF STD/HRC/IRC
14-69 14-36
37-59
60-85
86-94
95-99
100-135
01
automatically be muted.
on screen after being selected.
(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1)
(100) (135)
(4A)
13 EN