Portfolio LWS1204E Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Carefully fit the post fitter on the fixture body (C)
over the end of the post (not supplied), making
sure the post fitter is fully seated. Mark the drill
point for the 3 mounting screws using 3 mounting
holes as reference. After marking hole locations,
remove fixture from post and drill 1/16 in. pilot
holes for screws (AA).
2. Attach ground fixture wire to the ground wire
from the post (usually GREEN or BARE). Connect
the neutral WHITE or RIBBED side fixture wire to
the neutral usually WHITE wire from the post.
Connect the hot BLACK or SMOOTH side fixture
wire to the hot usually BLACK wire from the
post. Fasten wires together with a wire
connector (BB) and tightly wrap wire connector
(BB) with electrical tape (not included).
Hardware Used
Wire
BB
Connector
1
2
x 3
4
BB
White Wire
From Post From Fixture
Smooth Side
Black Wire
From Post From Fixture
Bare, or Green
Bare, or Green
Ground Wire
Fixture Ground Wire
From Post
Lowes.com/portfolio
C
Post Fitter
Post
White or
Ribbed Side
Black or