DeWalt D51823 Manual Del Usuario página 26

E N G L I S H
Maintenance
Your D WALT tool has been designed to operate
E
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends on proper tool care and regular cleaning.
Perform the following maintenance operations every
day:
Lubricate tool with 10-15 drops of D
pneumatic tool oil
• Insert drops into the air fi tting on the end cap of
the tool.
Drain all condensation from the air compressor
tanks and hoses
• Open petcocks or other drain valves on the
compressor tanks.
• Allow any accumulated water to drain from hoses.
Clean magazine, pusher, and contact trip
mechanism
• Clean by blowing with compressed air.
Ensure that all fasteners on the tool are tight and
undamaged
• Tighten loose fasteners using the appropriate tool.
Troubleshooting
If your tool seems not to operate properly, follow
the instructions below. If this does not solve the
problem, please contact your repair agent.
Tool does not work
• Check the air supply.
• If the temperature is low, warm the tool up.
Tool has insuffi cient power
• Check the air supply.
• Check if the air exhaust is clear.
• Lubricate the tool.
Top cap leaks air
• Tighten the cap screws.
26
Tool skips nails
• Check the air supply.
• Lubricate the tool.
• Clean the magazine and nosepiece.
• Check that the magazine latch is holding the
magazine fi rmly.
Fasteners jam in tool
• Make sure only to use fasteners of the type
specifi ed.
• Check that the magazine latch is holding the
WALT
E
magazine fi rmly.
• Tighten the nosepiece screws.
Protecting the environment
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT offi ce at the address indicated in this
E
Separate collection. This product must
not be disposed of with normal
household waste.
WALT product
E
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT products once they have
E