Erich Jaeger 735054 Instrucciones De Montaje página 6

Lay the wire set end marked with
right rear lights.
Join and locate the 6-wire socket on the side of the vehicle with the corresponding counter-pieces of
the cable wire.
Lay the wire set end marked with
left rear lights.
Join and locate the 6-wire socket on the side of the vehicle with the corresponding counter-pieces of
the cable wire.
Affix the terminal lug of the brown cable at the appropriate position using the enclosed sheetmetal
screw and toothed washer.
(Ground the connection; if necessary, drill a 3.5 mm (dia.) hole)
4. Test function
Reconnect earth cable to the battery.
Check all functions with a suitable tester.
The tester is available from specialist shops under JAEGER Item no:
The adapter to tester 361009 for 7-pin sockets is available
from specialist shops under JAEGER Item no:
Lay all wires of the installation set along the wires of the sides of the vehicle, fix them
using the enclosed cable binders and/or insert them into the existing cable holders!
Subject to change!
059063 -061207EJH
© Erich Jaeger GmbH + Co. KG, Straßheimer Str.10, D-61169 Friedberg, Tel.: (++49 (0) 6031 794-0)
R
along the wire strand up to the installation location of
L
along the wire strand up to the installation location of
Reinstall all the linings and dismantled parts.
361009
311052
6 / 27