Erich Jaeger 735054 Instrucciones De Montaje página 4

Installation Instructions for Electric Kit 735054
Electric Kit for Trailer Coupling, 7 Channel, 12 Volt, According to ISO 1724,
MAZDA DEMIO
MAZDA 323 S (4-door) Typ BJ 09/98 - 09/03
MAZDA 323 F (5-door) Typ BJ 09/98 - 09/03
MAZDA 323 P (3-door) Typ BA 03/97 - 09/03
MAZDA PREMACY
MAZDA MPV
Contents: 1 socket, 7-pin, with tripping contact for rear fog light,
1 8-pole wire set,
1 rubber washers for the plug,
3 screws M5 x 30,
3 nuts M5, self-tightening,
1 sheet metal screw 4,8 x 16,
1 serrated washer,
5 cable ties, 300 mm in length,
5 cable ties, 100 mm in length.
General Preparations:
1. Disconnect earth line from battery.
2. Make a conduit for the wire set.
3. Install 8-wire cable set and socket.
4. Test function.
1. Disconnect earth line from battery
For safety reasons, please first disconnect the earth wire from the battery before starting any work.
To ensure that no saved data is lost, we recommend that you use a stand-by current maintenance
device. (Please follow the instructions of the manufacturer)
2. Make a conduit for the wire set
2.1. All models with the exception of MPV
Remove rear parcel shelf (if present) and tip the rear seat forwards.
Remove the floor panel in the boot or tip it forwards and (if present) remove the cover from the spare
wheel and tyre storage space.
Take out the spare wheel and tyre.
Remove the panelling from the rear-end body elements.
Detach the left and right lateral boot panelling at the rear.
Subject to change!
059063 -061207EJH
© Erich Jaeger GmbH + Co. KG, Straßheimer Str.10, D-61169 Friedberg, Tel.: (++49 (0) 6031 794-0)
without trailer indicator monitor!
04/00 - 03/03
06/99 >
11/99 >
4 / 27