Connection-Wire Diagram; Test - koban KLD7 Manual De Instrucciones

KLD7
Infrared LED Sensor Lamp

CONNECTION-WIRE DIAGRAM:

SENSOR INFORMATION:
Height of installation: 1.8-2.5m

TEST:

--Turn the TIME knob anti-clockwise
on the minimum. Turn the LUX knob
clockwise on the maximum (sun).
--Switch on the power; the lamp will
have no signal at the beginning. After
Warm-up 30sec, the lamp can start work .
If it receives the induction signal, the lamp will turn on. While there is no another
induction signal any more, the lamp should stop working within 10sec±3sec.
14
Figure1 Figure2
Detection Distance: Max.9m
www.grupotemper.com
Figure 3