Getting Started; Connect Hub To The Computer; Connect Usb Devices To Hub - Philips SDH1600/27 Manual Del Usuario

3 Getting started
This section helps you with the first time
installation of the USB2.0 hub.
3.1 Connect hub to the computer
Warning
Carefully read the safety precautions in
section 1.1 Safety before you connect the
hub.
1. Plug the A cable connector to A USB
port in your computer.
2. Plug the smaller plug (5-pin Mini B) to
the hub.
Tip
This hub is Hot-Swappable, this means you
can disconnect from computer without go-
ing through Windows disconnect screens.
6
All manuals and user guides at all-guides.com
3.2 Connect USB devices to the hub
1. If you use high power consumption
2. Plug first USB device into Port 1 on the
3. Plug second USB device into Port 2.
. Plug third USB device into Port 3.
5. Plug fourth USB device into Port .
devices, like external HD drives, please
use external power supply converting
to DC 5V/2A.
hub.
AC ADAPTER (5V2A)
DC 5V/2A