Dmx Addressing - NEO ION 1915Z Manual De Usuario

5. DMX CONNECTION AND DMX PROTOCOL

DMX addressing

The device is controlled by universal DMX 512 pro-
tocol, DMX address is the start channel used to re-
ceive instructions from the external controller. For
independent control, each fixture must be assigned
its unique address control channels. For example,
this device has four channel modes: 19/98/18/20,
if we set the mode at standard 19 channels mode,
and there are several models need to be inde-
Connection: use DMX cable with 3+5 pin XLR-plugs
to connect the controller with the fixture or one
fixture with another.
pendently controlled, we just simply address first
fixture at 1, and second fixture at 20, third one at
39, etc.
If the devices have the same address, they will
behave synchronically. DMX addressing is limited,
don't set the address so high that without enough
control channels for the fixtures.
Display is flashing when no DMX signal is received.
P. 11
English version - Neo ION 1915Z