EMU SHADE PRO Manual Del Usuario página 23

COMPONENTS AND SCREWS INCLUDED IN THE SHADE UMBRELLA PRO ART.995 996:
A. UMBRELLA SUPPORT: The UMBRELLA SUPPORT (A) allows the installation of the SIDE POLE (2) on the floor. The
UMBRELLA SUPPORT consists of a tube and a plate of diam. 145 mm and 10 mm height with 5 holes in which to insert
the anchors for fixing to the floor.
ACCESSORY COMPONENTS:
B. UMBRELLA SUPPORT SPACER: this component (art.992) allows the SHADE PRO umbrella complete with the LED
Light Kit art.999 to be installed on the floor, as it allows the electric cable to pass under the UMBRELLA SUPPORT (A).
.
WIND RESISTANCE GUIDELINES FOR SHADE PRO UMBRELLA:
Light to moderate winds.
Once the SHADE PRO umbrella has been correctly installed, it is suitable for use in light to moderate
wind conditions in the position with the sheet open. Please follow these guidelines:
1. When the wind becomes stronger or before uncertain and worrying weather conditions, the umbrella
must be closed, lowered and tied to the side pole.
2. The umbrella must be kept in a closed position and tied to the central post when not in use.
3. Before or during extremely severe weather conditions, it is advisable to remove and protect the entire
SHADE PRO umbrella including the structure indoors.
A. UMBRELLA SUPPORT
B. 992 UMBRELLA
SUPPORT SPACER
22