Horizon Global 76290 Instrucciones De Instalación página 4

1. Clean weldnuts: Remove the any stickers or remove any plugs that may be
covering weldnuts on the frame rails, both sides. Make sure weldnuts are
free from rust and debris. Use a M14x1.5 tap to clean the weldnuts if
necessary.
3. Tighten all M14 fastners with torque wrench to 89 Ft.Lb. (121 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2019 Horizon Global™ Corp - Printed in Mexico
2. Install hitch: Raise the hitch into position and align holes in hitch bracket
to the frame rail weldnuts and loosely install the supplied M14 bolts ①
and conical washers ② to the hitch, see Figure 1.
Sheet 4 of 12 76290NP 04-20-19 Rev. A