Idiomas disponibles

Idiomas disponibles

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
5000 lb. (2270 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2018 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76226, 84226, CQT76226
Max Tongue
Weight
Weight
750 lb. (341 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 33
Scan for safe towing
tip, or visit
http://www.cequent
group.com/qr-
product.aspx
76226NP
03-23-18
Rev. A
Tabla de contenido
loading

Resumen de contenidos para Horizon Global 76226

  • Página 23: Garantía Limitada De Por Vida

    [email protected] GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Página 24: Equipo Necesario

    Instrucciones de instalación Escanear para instrucciones de la NÚMEROS DE PARTES: 76226, 84226, CQT76226 instalación paso por paso Sitio web: www.horizonglobal.com con FOTO, o visitar Assistance técnica: 800-632-3290 http://www.cequentgrou p.com/qr-product.aspx [email protected] Aplicaciones: Tiempo de instalación: 75 min. Años Marca Modelos...
  • Página 25 No cortar los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2018 Horizon Global™ Corp. - Impreso en México Hoja 25 de 33...
  • Página 26 Modelos 2011 a 2017, ver Figura 7. Modelos 2018 a actuales, ver Figura 8. ©2018 Horizon Global™ Corp. - Impreso en México Hoja 26 de 33 76226NP 03-23-18 Rev.
  • Página 27 2. Retirar el panel inferior de la carrocería: Con un cubo de 8 mm y 10 mm de profundidad, retirar los tornillos y las tuercas hexagonales (varían según el año del modelo) del panel inferior de la carrocería y dejar a un lado. Modelos 2011 a 2017 Modelos 2018 a actuales ©2018 Horizon Global™ Corp. - Impreso en México Hoja 27 de 33 76226NP 03-23-18...
  • Página 28 3c. Con un cubo de 8 mm, quitar (2) o (3) tornillos a lo largo del borde exterior de la parte de abajo de la fascia y (1) tornillo del interior del receptáculo de la rueda cerca de la parte de abajo. ©2018 Horizon Global™ Corp. - Impreso en México Hoja 28 de 33...
  • Página 29 (2) tornillos que sujetan la fascia. Ver la Figura 4. ©2018 Horizon Global™ Corp. - Impreso en México Hoja 29 de 33 76226NP 03-23-18 Rev.
  • Página 30 4. Modelos 2011 a 2017 únicamente: Retirar los soportes plásticos de la fascia: Con un cubo de 10 mm de profundidad, retirar (4) tuercas hexagonales de los (2) soportes plásticos de la fascia, (1) por cada lado. Ver la Figura 5. ©2018 Horizon Global™ Corp. - Impreso en México Hoja 30 de 33...
  • Página 31 Modelos 2018 a actuales: Mantener la junta de espuma en el panel lateral. Si la junta de espuma está dañada, aplicar sellador de silicona (no incluido) en las superficies de montaje del soporte del enganche. Ver la Figura 6. ©2018 Horizon Global™ Corp. - Impreso en México Hoja 31 de 33...
  • Página 32 Apretar las tuercas de brida hexagonales del colgante del escape con una llave de torque a 25 Lb.-pies (34 N*M) Se necesita la torsión adecuada para mantener el enganche unido firmemente al vehículo durante el remolque. Sellante de silicona Ambos soportes Figure 6 ©2018 Horizon Global™ Corp. - Impreso en México Hoja 32 de 33 76226NP 03-23-18 Rev. A...
  • Página 33 Volver a instalar el panel inferior de la carrocería con los tornillos y/o tuercas hexagonales existentes. 5” 3-1/2” Figure 7 2011 – 2017 Models 4-1/4” 3-1/2” 2018 - Current Figure 8 ©2018 Horizon Global™ Corp. - Impreso en México Hoja 33 de 33 76226NP 03-23-18 Rev. A...

Este manual también es adecuado para:

84226Cqt76226

Tabla de contenido