Horizon Global 24963 Instrucciones De Instalación página 4

1. Remove underbody panel – using a flat head screw driver and a 10mm socket, remove (5) push pin rivets and (2) hex nuts from the driver's side panel. NOTE: Two
(2) of the rivets connect the driver's side panel to the center panel.
2. Lower muffler – Using an exhaust hanger removal tool, lower muffler by removing (1) rubber hanger on the passenger's side and (1) forward hanger at center of
vehicle. A spray a lubricant or soapy water on rubber hangers makes them slide off metal pins more easily. NOTE: Using a ratchet strap or bungee cord, be sure
that exhaust is supported before removing rubber hangers.
©2017 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 15 24963NP 7-7-17 Rev. A