Idiomas disponibles

Idiomas disponibles

Website: www. horizonglobal.com
Technical Assistance: 800-632-3290
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
2000 lb. (907 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2020 Horizon Global Americas Inc. - Printed in Mexico
Installation Instructions
PART NUMBERS: 24995, 77995, CQT24995
Max Tongue
Weight
Weight
200 lb. (90.7 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Horizon Global Americas Inc. ("We", "Us" or
"Our") warrants to the original consumer purchaser only ("You" or "Your") that the product
will be free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 21
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
24995NP
3-23-20
Rev. A
Tabla de contenido
loading

Resumen de contenidos para Horizon Global 24995

  • Página 1 [email protected] LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global Americas Inc. ("We", “Us” or To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be free from material defects in both material and workmanship, ordinary wear and tear ALWAYS read, understand and follow warnings and instructions •...
  • Página 2: Equipment Required

    Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 2000 lb. (907 kg) 200 lb. (90.7 kg) Hitch Illustration Weight Distributing ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 2 of 21 24995NP 3-23-20 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 3 of 21...
  • Página 4 Press the bracket inwardly to release the piece from the plastic tab attached to frame rails. Return the bracket attachment and hardware to vehicle owner. 10mm ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 21 24995NP 3-23-20 Rev.
  • Página 5 2. Lower vehicle exhaust – Using the exhaust removal pliers, lower exhaust by removing (4) rubber hangers, (2) on each end of muffler. Note: Be sure that exhaust is supported before removing rubber hangers. A spray lubricant or soapy water on rubber hangers make them slide off metal pins more easily. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 5 of 21...
  • Página 6 3. Enlarge vehicle frame access holes – Peel off the sticker on the access hole if present. Using die grinder, enlarge the access hole to 1’’ diameter hole each side, see Figure 1. Ø 1.00” ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 6 of 21 24995NP 3-23-20 Rev.
  • Página 7 Remove pull wires and loosely install conical washer ③ and hex nut ④ to hitch. 5. Tighten all 7/16‘’ fasteners with torque wrench to 50 Ft.-Lb. (68 N*M). 6. Reinstall the exhaust. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 7 of 21 24995NP 3-23-20 Rev.
  • Página 8: Garantie À Vie Limitée

    [email protected] GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 9 Poids max. au timon de la remorque Sans répartition 2000 lb. (907 kg) 200 lb. (90.7 kg) de charge Répartition de charge Illustration de l'attelage ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 9 de 21 24995NP 3-23-20 Rev. A...
  • Página 10 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique...
  • Página 11 à tête plate, retirer les (3) rivets de la fixation de support inférieure. Appuyer sur le support pour libérer la pièce de la patte en plastique fixée aux longerons. Remettre la fixation de support et la quincaillerie à son propriétaire. 10mm ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 11 de 21 24995NP 3-23-20 Rev.
  • Página 12 Remarque : Prendre soin de soutenir correctement les supports en caoutchouc avant de les retirer. Vaporiser un lubrifiant ou de l’eau savonneuse sur les supports en caoutchouc aide à les faire glisser hors des broches en métal. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 12 de 21...
  • Página 13 3. Élargissement des trous d’accès de cadre du véhicule – Peler l’autocollant sur le trou d’accès, le cas échéant. À l’aide d’une meuleuse, élargir le trou d'accès à 1 po de diamètre de chaque côté; consulter la Figure 1. Ø 1.00” ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 13 de 21 24995NP 3-23-20 Rev.
  • Página 14 5. Serrer toutes les fixations 7/16 po à l'aide d'une clé dynamométrique à 50 Lb.-pi (68 N*M). Pour que l'attelage soit fixé solidement au véhicule lors du tractage, il est nécessaire d'appliquer un serrage adéquat. 6. Réinstallation de l'échappement. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 14 de 21 24995NP 3-23-20 Rev.
  • Página 15: Garantía Limitada De Por Vida

    GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: estará...
  • Página 16: Aplicaciones

    Peso máximo de la remolque horquilla Carga de peso 2000 lb. (907 kg) 200 lb. (90.7 kg) Distribución de peso Ilustración del enganche ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 16 de 21 24995NP 3-23-20 Rev. A...
  • Página 17 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 17 de 21...
  • Página 18 (3) remaches del accesorio del soporte inferior. Empujar el soporte hacia adentro para liberar la pieza de la pestaña de plástico que está unida a los largueros del bastidor. Devolver el accesorio del soporte y los fijadores al propietario del vehículo. 10mm ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 18 of 21 24995NP 3-23-20 Rev.
  • Página 19 Rociar un lubricante o agua jabonosa en los colgantes de goma permite deslizar los pasadores de metal más fácilmente. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 19 of 21...
  • Página 20 3. Agrandar los orificios de acceso al bastidor del vehículo: Retirar el adhesivo del orificio de acceso si está presente. Con la amoladora de matriz, agrandar el orificio de acceso a 1'' de diámetro en cada lado, ver la Figura 1. Ø 1.00” ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 20 of 21 24995NP 3-23-20 Rev.
  • Página 21 5. Apretar todos los fijadores 7/16" con una llave de torque a 50 Lb.-pies (68 N*M). Se necesita la torsión adecuada para mantener el enganche unido firmemente al vehículo durante el remolque. 6. Volver a instalar el escape del vehículo. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 21 of 21 24995NP 3-23-20 Rev.

Este manual también es adecuado para:

77995Cqt24995

Tabla de contenido