Horizon Global 24984 Instrucciones De Instalación

Mazda 2019 -current
Idiomas disponibles

Idiomas disponibles

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
2000 lb. (908 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2019 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 24984, 77984, CQT24984
Max Tongue
Weight
Weight
200 lb. (90.8 kg)
X
X
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 27
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
24984NP
6-15-19
Rev. A
Tabla de contenido
loading

Resumen de contenidos para Horizon Global 24984

  • Página 19: Garantía Limitada De Por Vida

    [email protected] GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Página 20: Equipo Necesario

    Instrucciones de instalación Escanear para instrucciones de la instalación paso por NÚMEROS DE PARTES: 24984, 77984, CQT24984 paso con FOTO, o visitar Sitio web: www.horizonglobal.com http://qr.towingproducts. net/qrproducts/qr- Assistance técnica: 800-632-3290 product [email protected] Aplicaciones: Tiempo de instalación: 40 min Años Marca...
  • Página 21 Se debe retirar y reemplazar un enganche o esfera que se hayan dañado. Observar las precauciones de seguridad al trabajar por debajo del vehículo y usar protección visual. No cortar los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. © 2019 Horizon Global™ Corp. Impreso en México Hoja 21 de 27...
  • Página 22 10 mm, retirar (1) tornillo del accesorio de soporte inferior, por cada lado. Empujar el soporte hacia adentro para liberar la pieza de la pestaña de plástico que está unida a los largueros del bastidor. Devolver el panel al propietario del vehículo. © 2019 Horizon Global™ Corp. Impreso en México Hoja 22 de 27...
  • Página 23 2. Bajar el escape: Con los alicates para retirar el escape, retirar los ganchos de goma más posteriores para bajar el escape. Cerciorarse de apoyar el escape para evitar daños. Nota: El lubricante o el agua jabonosa pueden facilitar la extracción de los colgantes de goma. © 2019 Horizon Global™ Corp. Impreso en México Hoja 23 de 27...
  • Página 24 3. Agrandar el orificio de acceso: Con la amoladora de matriz, agrandar el orificio de acceso a 1'' de diámetro en cada lado, ver la Figura 1. © 2019 Horizon Global™ Corp. Impreso en México Hoja 24 de 27 24984NP 6-15-19 Rev.
  • Página 25 4. Doblar el protector de calor: Doblar ligeramente el protector de calor alejándolo del área de montaje del enganche. © 2019 Horizon Global™ Corp. Impreso en México Hoja 25 de 27 24984NP 6-15-19 Rev. A...
  • Página 26 Levantar el enganche y pasar el cable de insertar instalado anteriormente a través de la ranura del soporte del enganche. Retirar los cables de insertar y sin apretar instalar las arandelas cónicas ③ y las tuercas hexagonales ④ en el enganche. © 2019 Horizon Global™ Corp. Impreso en México Hoja 26 de 27...
  • Página 27 7. Volver a instalar el escape: Levantar el escape de nuevo a su posición y volver a instalar todos los colgantes de goma del escape que se retiraron anteriormente. © 2019 Horizon Global™ Corp. Impreso en México Hoja 27 de 27...

Este manual también es adecuado para:

77984Cqt24984

Tabla de contenido