Rola DART CARGO BASKET Manual Del Usuario página 4

Please read all instructions carefully before assembly, installation and/or use of this product.
6
Holes for
License plate
Pull handle to tilt
•Keep the unit clean and remove road salt and debris.
• Do not allow harsh chemicals, road salt, or mud to accumulate on the product for an extended period of time.
• Wash the product with mild soap and water only and a non-abrasive cloth after use.
• The lock and hinges should be lubricated with graphite or similar dry lubricant.
IMPORTANT NOTES
•All Pins, Clips and fasteners must be secured before every use.
• Check security of load, fasteners, pin and clip at fuel and rest stops.
• If the Cargo Carrier or cargo, blocks the license plate, you can mount the license plate directly to the back of the cargo
carrier using the two existing holes in the rear panels. (screws not included)
LOADING
Load the Cargo Carrier so that most of the weight is in the center of the platform.
Cequent Performance Products, Inc.
Plymouth, MI 48170
Anti-Rattle Pin
CARE AND USAGE
CORRECT
Product Name:
DART CARGO BASKET
Product Code:
INSTALL & OPERATE CARGO
• With the help of another person,
• Line up threaded insert in shank with
• Tighten pin until snug.
• Install Clip onto end of anti-rattle pin.
Printed in China
59550
Clip
BASKET
install basket into your 2" receiver
hitch.
5/8 hole in hitch and install the Anti-
Rattle Pin as shown.
INCORRECT
www.rolaproducts.com
59550N Rev E 5-1-12