yeep.me 100 Manual De Instrucciones página 16

7.1. INSPECTING AND CLEANING YOUR DEVICE
• Regularly check the steering column, head tube, handles and tire wear.
• We recommend that you regularly check that the screws on the front and
rear wheels, the shock absorbers, and the front cover are tight enough
and that you tighten them if needed. These adjustments may be needed
because of vibrations caused by using the device.
• Regularly check the inflation of the rear wheel and inflate with a bicycle
pump or equivalent when required.
Here are some instructions and precautions for cleaning the device:
• Unplug all the device's charging cables before cleaning it.
• Do not immerse it in water.
• Do not use a high-pressure cleaner, water jet or any other appliance or
washing method that would allow water to seep into the device.
• Clean the device with a sightly damp sponge or a soft cloth, avoiding the
connectors and buttons and making sure water is not allowed to seep into
the plugs, circuits or inside the product.
• Do not use water or liquid cleaners directly on the device to clean it.
• Do not use abrasive products or solvents as these could damage the paint
on your device.
• Be careful when cleaning and wiping plastic parts.
• Do not use abrasive products or solvents to clean metal or plastic parts.
7.2. MAINTAINING YOUR DEVICE
If the product, a component, or the battery are worn out, please contact an
authorised service centre to repair or recycle your product. Tutorials on how
to maintain your device as well as a catalogue of spare parts are available on
the website: https://yeep.me
The device is equipped with bearings. Regularly verify that both wheels are
functioning properly by lifting the device and running the wheels idle. Also
check the steering column regularly and before each use to ensure nothing
prevents it from turning. If you notice a noise, or the unit doesn't run smoothly,
carry out clamping operations if this may improve the issue. Discontinue use
of the device and contact your dealer or support centre for maintenance
repairs if the problem persists.
7.3. STORING YOUR DEVICE
• Fully charge your device before storing it.
• Store your product indoors in a clean and dry place with an ambient
temperature ranging from 0°C to 40°C.
16