Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connect your plasma-disc to the mains using the power-adapter.
OPERATION
After you connected the effect to the mains, the plasma-disc starts running.
For the 40cm version:
Set the mode-selector to Manual. Turn the Pattern-control to the maximum right position. Adjust the
sensitivity via the Sensitivity-control. As soon as you touch the screen, the device will react in accordance
with the settings you made.
Set the mode-selector to Auto. The flashes are now sound-controlled. You can adjust the microphone
sensitivity via the Sensitivity-control. Turn the Pattern-control to the right and watch how the patterns
change.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply (via enclosed
power supply unit):
Power consumption:
Sound-control:
Weight:
Please note: Every information is subject to change without prior notice. 15.03.2005 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Diameter 25 cm
230 V, 50 Hz (12V DC)
14 W
via built-in microphone
1.8 kg
Diameter 30 cm
230 V, 50 Hz (12V DC)
16 W
via built-in microphone
2.2 kg
12/22
Diameter 40 cm
230 V, 50 Hz (12V DC)
18 W
via built-in microphone
3 kg
80600115_V_1_2.DOC
Tabla de contenido
