Rollei Hear:Me Wireless Manual De Instrucciones página 43

Function and use of the Receiver (RX)
Introduction to the function
5 3.5 mm TRS audio output connector
You can connect a smartphone to the receiver using the
3.5 mm TRS-TRRS audio cable. To connect a camera, use
the 3.5 mm TRS-TRS audio cable. We recommend using the
3.5mm TRS-TRS-TRS audio cable with impedance if disturbing
noises are heard during recording.
6 3.5 mm TRS/TRRS headphone jack
Use this connector to connect headphones.
4
Connecting / coupling transmitter and receiver
Transmitter and receiver were paired in the factory. If the devices
needs to be paired again, please follow the description below.
One trigger – one transmitter:
Switch on the transmitter and receiver within a radius of one
metre, then press the pairing button for the connection. The trans-
mitter (TX) will now pair with the receiver (RX). The screen symbol
changes from
5 6
to after pairing.
Transmitter (TX)
Receiver (RX)
43
The audio dynamic bar
of the microphone is
available after pairing.