Rollei Hear:Me Wireless Manual De Instrucciones página 40

Function and use of the Transmitter (TX)
40
Introduction to the function
1 On / Mute Key
Press the on/mute key for about 3 seconds to switch on the
unit. Press the key shortly to mute the unit. The mute mode
is only available when the monitor is switched on. If it is off,
press any key to switch it on. Once the screen is lit, you can
activate the mute mode.
2 Connection key
Press the connection key for about 3 seconds to pair the
device with the receiver. The device can only be paired if the
screen is switched on. If it is off, press any key to switch it on.
As soon as the display is illuminated, you can establish the
connection between the two devices.
ENGLISH
3 USB-C charging port
To charge, connect the transmitter to the power supply using
the USB A-USB C charging cable. Do not leave the device
unattended during charging.
Note: No quick-chargers and/or superchargers may be used
to charge the Rollei Hear:Me Wireless, only power supplies
with a maximum of 5V, 2 A. Please use only the supplied
USB cable for charging the device. Otherwise, there is a risk of
fire or electric shock.
4 Reset
When an abnormal phenomenon occurs, such as a crash or
inability to turn on the machine, then insert the reset pin into
the reset hole to reset it.
5 3.5 mm TRS microphone connector
Plug in the 3.5mm TRS microphone input cable and you can
use the external lavalier microphone for recording. At this
time, the machine's internal microphone is turned off.