Uline H-3619 Manual De Usuario página 4

5. Attach the sill (4) to the sides. Place nut loosely on
each of the studs and slide the ends of the sill into
the slots on both sides of the unit. Then, securely
tighten the nuts. (See Figure 5)
4
Slide ends into the slots
on the bottom of the sides.
6. Place rear flange of the bottom shelf into the bottom
shelf supports of the back. The flange with two holes
should face the front, hanging over the sill.
(See Figure 6)
Insert bottom shelf
into bottom shelf supports.
PAGE 4 OF 15
ASSEMBLY CONTINUED
Nuts placed loosely
on studs of the sill.
Figure 5
Figure 6
7. Set the unit upright and insert the other shelves,
facing the edge with no slots toward the front of the
cabinet. Ensure the rear of the shelf is inserted into
all four shelf supports. (See Figure 7)
NOTE: The slots on the other three sides of the
shelf fit over the lances on the cabinet walls,
which hold the shelf in place.
Figure 7
8. Attach the left door (6) to the unit. Place the door on
the hinges, align the holes, and drive two hinge pins
(9) into place. Repeat for right door. (See Figure 8)
NOTE: If having issues with doors aligning, it
may be due to cabinet not sitting level. Use
included nut driver to adjust leveling feet in
bottom front two corners. Nut driver should
insert through inside of cabinet down into feet
and adjust as needed.
9
6
9
Figure 8
SEE NEXT PAGE TO ATTACH HANDLE TO CABINET
0321 IH-3619