Idiomas disponibles
Idiomas disponibles
Tighten bolts to the torque indi-
Tightening
Torque
cated in the right table as standard
value unless otherwise explicitly
specified.
The value shows conventional or
"4" marked bolt tightening torque.
For other bolts not listed in the
table, refer to the service manual.
1. Remove the pillion seat.
Installation
2. Remove the cover A.
3. Remove the clamp B from the
cover A.
4. Remove the cap C from the
coupler.
Diameter
(mm)
5
6
8
10
GENUINE SUZUKI ACCESSORIES
3/4
Tightening Torque
N·m
kgf-m
lbf-ft
3.0
0.3
2.0
5.5
0.55
4.0
13.0
1.3
9.5
29.0
2.9
21.0
