Electrical Safety; Installation Safety - Beko RDSE465K20W Manual Del Usuario

Safety and environmental instructions
If there is a lock on the door of the product,
the key should be kept out of the reach of
children.
A

1.3 - Electrical safety

The product must be unplugged during ins-
tallation, maintenance, cleaning, repairing
and moving procedures.
If the power cable is damaged, it must be
replaced by a qualified person specified
by the manufacturer, authorised service
agent or importer in order to avoid potential
dangers.
Do not squeeze the power cable under or
behind the product. Do not place heavy ob-
jects on the power cable. Power cable must
not be bent excessively, pinched or get in
contact with any heat source.
Do not use extension cords, multi-sockets
or adapters to operate the product.
Portable multi-sockets or portable power
sources can overheat and cause fire.
Therefore, do not keep any multi-sockets
behind or near the product.
Plug must be easily accessible. If this is not
possible, the electrical installation to which
the product is connected must contain a
device (such as a fuse, switch, circuit bre-
aker, etc.) which conforms to the electrical
regulations and disconnects all poles from
the grid.
Do not touch the power plug with wet
hands.
Remove the plug from the socket by grip-
ping the plug and not the cable.
A
1.4 - Transportation safety
Product is heavy; do not move it alone.
Do not hold its door when moving the pro-
duct.
Pay attention not to damage the cooling
system or the piping during transportation.
If the piping is damaged, do not operate
the product and call the authorised service
agent.
A

1.5 - Installation safety

Call the authorised service agent for instal-
lation of the product. To make the product
ready for use, check the information in the
user manual to make sure that the elect-
ricity and water installations are suitable.
If they are not, call a qualified electrician
and plumber to have the necessary arran-
gements made. Otherwise, there is the risk
of electric shock, fire, problems with the
product, or injury!
Prior to installation, check if the product has
any defects on it. If the product is damaged,
do not have it installed.
Place the product on a clean, flat and solid
surface and balance it with adjustable feet.
Otherwise, the product may tip over and
cause injuries.
The installation location must be dry and
well ventilated. Do not place carpets,
rugs or similar covers under the product.
Insufficient ventilation causes the risk of
fire!
Do not cover or block the ventilation ope-
nings. Otherwise, power consumption incre-
ases and your product may get damaged.
Product must not be connected to supply
systems such as solar power supplies.
Otherwise, your product may get damaged
due to sudden voltage changes!
The more refrigerant a refrigerator contains,
the larger the installation location must
be. If the installation location is too small,
4 /22 EN
Refrigerator / User Manual