Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Low
power
output
Inverter
does
not work after
connecting
the
cables
reverse
Warnings & Caution
⚫ Use of the device in life support applications where failure of the device can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its
safety or effectiveness is not recommended. ⚫ Do not use the device in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide, and also not near flammable
materials, fumes or gases. ⚫ Since the device requires adequate ventilation during
operation, do not block fan or cooling vents and do not cover the device. Do not operate
near car heating vents or in direct sunlight. ⚫ Keep the device dry at all times and
disconnect when not in use. ⚫ Turn OFF connected equipment before (!) starting your
engine. DO NOT plug a surge protector, line conditioner or UPS system into the device. If
you attach AC extension cords, use the heaviest practical gauge. ⚫ Before connecting a
battery charger or adapter, check its manual to make sure that the technical specifications
of the device (including output waveform) fall within the recommendations of the external
battery charger or adapter.
Battery
condition may
be poor
Fault
connection
The
internal
protection has
disabled
in
inverter
Hints for Environment Protection: Packages materials are raw
materials and can be recycled. Do not disposal old devices or
batteries into the domestic waste. Cleaning: Protect the device from
contamination and pollution (use a clean drapery). Avoid using rough,
coarse-grained materials or solvents/aggressive cleaner. Wipe the
cleaned device accurately. Distributor: Technaxx Deutschland
GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany
Recharge or replace a battery
Make sure the battery and Inverter
terminal are clean
Contact vendor company for help
the
Tabla de contenido
