Horizon Global 75956 Instrucciones De Instalación página 4

1. Remove (1) screw at the bottom fascia center and the appearance panel door
as shown in Figure 2. Return (1) screw and appearance panel door to owner.
3a. Raise and slide the hitch into position, starting from driver side. Loosely install
(1) M12 bolt ① and (1) conical washer ② at the foremost slot on driver side, see
Figure 3.
©2015, 2019, 2021 Horizon Global™ Corp - Printed in Mexico
2. Lower exhaust by removing (2) M12 bolts from exhaust hanger bracket on each
side. Use exhaust support stand to prevent damaging muffler. Return (4) screws to
owner.
3b. Sandwich the hitch bracket between exhaust hanger bracket and frame rail on
both sides. Loosely install the rest of fasteners to the exhaust hanger bracket on both
sides.
4. Tighten all M12-1.25 CL 10.9 fasteners with torque wrench to 76 lb-ft (103 Nm)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 4 of 12 75956NP 09-16-21 Rev. B