Sonos ZonePlayer 90 Manual De Instrucciones página 29

Sonos ZonePlayer 90
• Using the Sonos Controller, select Settings→ZonePlayer Settings from the
Music Menu. Select the ZonePlayer attached to the receiver. Select Line-Out
Level, and choose Variable.
• Using the Desktop Controller software, select ZonePlayer Settings from the
Zones menu. Select the ZonePlayer attached to the receiver, and then click
Settings. Click the Line-Out tab, and choose Variable.
Use the Sonos Controller to adjust the volume on your Sonos system so you can
3.
hear music. This may be at the high end of the volume scale.
If desired, you can readjust the volume on your home theater system or amplifier
4.
so that the volume range for the Controller falls within your typical listening range.
Connecting to a computer or powered speakers
• If you are connecting to your computer: You will need a stereo mini to RCA
Y-adapter audio cable (one 1/8-inch stereo miniplug to dual RCA male
connectors) to connect the ZonePlayer's analog audio output to the computer's
audio input.
• If you are connecting to powered speakers: You may need a Y-adapter audio
cable (one 1/8-inch stereo miniplug to dual RCA male connectors) to connect
the computer's speakers to the audio outputs on the ZonePlayer. If your
speakers have a male 1/8-inch stereo plug, you will need to attach a
female-to-female coupler between the speaker plug and the Y-adapter audio
cable.
17