Items Supplied And Packaging; Battery Display; Battery Change - Medisana FTD Instrucciones De Manejo

GB GB
2 Start-up

2.1 Items supplied and packaging

Please check first of all that the device is complete and is not damaged
in any way. In case of doubt, do not use the appliance and contact your
supplier or your service centre.
The following parts are included:
1 MEDIS N FTD thermometer, incl. battery
1 Stand
1 Instruction manual
The packaging can be reused or recycled. Please dispose properly
of any packaging material no longer required. If you notice any
transport damage during unpacking, please contact your supplier
without delay.

2.2 Battery display

2.3 Battery change

This thermometer is equipped with a safety catch in order to keep the
battery away from children. Push in the knob for opening the battery
compartment 8 with a pointed object and remove the battery (Fig.).
3 V CR2032 lithium battery is required for this thermometer. The
battery must be inserted with the positive terminal (+) on top.
14
W RNING
Please ensure that the polythene packing is kept
away from the reach of children!
Risk of suffocation!
The scope of delivery includes a battery (3 V
CR2032). Remove the safety strip before using for
the first time.
the battery symbol q in the lower area of the
display 3 .
In this case the battery should be replaced as soon
as possible. When the battery capacity has been
used up, the symbol "Lo" appears in the display
3 as well as the flashing battery symbol q and a
beep is heard (see fig.).
The thermometer can no longer be used without
changing the battery. Press the On/Scan button 2
to switch off the device.
low battery charge is indicated by