Troubleshooting Guide; Warranty - Kärcher VC 4s Cordless Manual Del Usuario

Cleaning / replacing the brush roller
Note
 Replace the brush roller when it is dam-
aged.
 Only dry brush roller is allowed for re-
placement.
 Do not dry the brush roller using a hair
dryer.
1. Press the release button, and pull out
the brush roller.
Illustration Y
Malfunctions often have simple causes that you can remedy yourself using the following
overview. When in doubt, or in the case of malfunctions not mentioned here, please contact
Fault
your authorised Customer Service.
The appliance does
not run.
Suction capacity
decreases. / Abnor-
mal sound or oper-
ating noise which
becomes louder.
The floor nozzle is
shut down auto-
matically.
The warranty conditions issued by our relevant sales company apply in all countries. We
shall remedy possible malfunctions on your appliance within the warranty period free of
cost, provided that a material or manufacturing defect is the cause. In a warranty case,
please contact your dealer (with the purchase receipt) or the next authorised customer ser-
vice site.
(See overleaf for the address)

Troubleshooting guide

Possible cause
Filter set / dust container is
missing.
Battery is nearly empty.
The appliance is in danger of
overheating.
Dust container is full.
HEPA filter set is clogged.
It is in danger of overheating.

Warranty

2. Remove the roller lever from the brush
roller.
Illustration Z
Brush roller
1
Roller lever
2
3. Clean up the winding hair in brush roller
and brush lever.
4. Install the roller lever, and insert dry or
new brush roller into floor nozzle, and
fix the brush roller into place.
Illustration AA
Ensure that the brush roller fits properly.
Remedy
1. Install the filter set and the dust
container before using the appli-
ance.
1. Charge the battery.
1. Check whether the dust contain-
er is clogged.
2. Clean the dust container.
3. Switch the appliance on again.
1. Check the dust container.
2. Empty / clean the dust container
and the HEPA filter set.
3. Check and clean the cyclone set.
1.Check whether the brush roller is
blocked, and clean the brush roller.
2. Switch on the appliance again.
English 27