Sliding Body Shelves; Egg Tray; Crisper; Chiller Compartment - Beko GNE 134620 X Manual Del Usuario

Ocultar thumbs Ver también para GNE 134620 X:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 160

Egg tray

You can install the egg holder to the
desired door or body shelf.
Never store the egg holder in the freezer
compartment

Sliding Body Shelves

Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to a
stop point when pulled towards front to
allow you reach the foods placed at the
back of the shelf; when it is pulled after
slightly lifted upwards at the second stop
point, the body shelf will be released.
The shelf should be hold tightly from the
bottom as well in order to prevent it from
tipping over. The body shelf is placed on
the rails at the sides of the refrigerator
body by bringing it to one lower or one
upper level.
The body shelf should be pushed
backwards to seat it completely.
1
2
3
4

Crisper

Crisper of your refrigerator is designed
specially to keep your vegetables
freshly without loosing their humidity.
For this purpose, cool air circulation
occurs around the crisper in general.
Remove the door shelves that align
with the crisper before removing the
crispers. You can remove the crispers
as illustrated in the figure.

Chiller compartment

Chiller compartments enable the foods
to be frozen become ready for freezing.
You can also use these compartments to
store your food at a temperature a few
degrees below the fridge compartment.
You can increase the inner volume of
your refrigerator by removing any of
the chiller compartments. To do this,
pull the compartment towards yourself;
the compartment will lean against the
stopper and stop. This compartment will
be released when you lift it about 1 cm
and pull it towards yourself.
28
EN
Tabla de contenido
loading

Este manual también es adecuado para:

Gne 134630 x

Tabla de contenido