Adjusting The Time - TW Steel CANTEEN AUTOMATIC Manual De Instrucciones

USE OF THE CROWN
To adjust the time or set the date, unscrew the
crown cap by turning it anti-clockwise. Once
you have unscrewed it, you will see the (small)
crown.
After adjusting, screw the crown cap back by
turning it clockwise.

ADJUSTING THE TIME

Pull the crown out to the 2nd position so that the
second hand stops at the (0) position. Turn the crown
to set the hour and minute hands. After adjusting the
time, push the crown back to its normal position.
WE STRONGLY ADVISE YOU NOT TO CHANGE THE DATE BETWEEN 22.00 AND
02.00 H. AS IT CAN DAMAGE THE DATE MECHANISM.
ADJUSTING THE DATE
The Canteen Automatic has a rapid date
adjustment. This rapid adjustment works as follows:
Pull the crown out to the 1st position. Turn the
crown counter-clockwise to set the date. After
the date has been set, push the crown back to its
normal position.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Hour hand
Second hand
Date
TECHNICAL INFORMATION OF THE
CANTEEN AUTOMATIC:
• Miyota Automatic movement Cal. 8215 with shock absorber
• 21 jewels
• Reserve energy 40 hours
• Winding component runs on ball bearings with 21.600 A/h
• Date indicated with rapid adjustment
• 10 ATM water resistant
• Case and clasp: solid stainless steel (316L)
• Deviation allowed of app. 20-30 seconds per day
• Deviation can be influenced with the positioning of the watch. You
can place the watch:
- 1: date dial side up
- 2: 6 o'clock side up
- 3: 9 o'clock side up
- 4: 3 o'clock side up
Please find out yourself what works best for your watch.
(0) position
Minute hand
Crown cap /
normal crown
AUTOMATIC position