TW Steel CEO DIVER AUTOMATIC Manual De Instrucciones página 2

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
TW STEEL
TW Steel is a watch brand harmoniously combining
both design and innovation. 'The Watch in Steel' leads
the oversized market with style and quality guaranteed.
TW Steel values the most important relationship of all –
the one with the consumer. To express this, we hereby
give you all the information that you need to enjoy your
TW Steel watch to the fullest.
The CEO Diver Multi Function Automatic takes its
energy from the movement which your watch makes on
your wrist.
The longer you wear the watch, the longer it will store
the
MAINTENANCE
TW Steel uses the best materials and carries out strict
controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel will
determine whether the appearance of the watch is
maintained in the future, or whether it will deteriorate.
In order to enjoy wearing your TW Steel as long as
possible, we include a number of tips: If the watch
comes into contact with hard or corrosive materials,
this can cause damage, which, if it occurs regularly, will
become clearly visible in the form of scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
movements in the form of energy. The maximum
reserve amounts to approximately 42 hours. This
means that the watch shows the time for up to 42 hours
when it is not worn. If you do not wear the watch for
some time, or if you start to use the watch again, you
can also wind it up by hand to get it started. Do this as
follows: unscrew the crown anti-clockwise. Turn the
crown clockwise and you wind up the movement.
The power reserve display situated under the 12/0
position will increase when you wind up the movement
by hand. When the power reserve hits 40, the
movement is fully wind up. Then screw the crown back
on the case clockwise.
instrument and should be treated as such. Adjusting the
time or date, opening or closing the crown or crowncap,
should not be done roughly, but carefully.
TW Steel recommends you to give your automatic
watch a complete overhaul by your TW Steel dealer
every 3-5 years
This will expand the durability and decreases the
deviation of your watch.
loading