Cleaning, Care & Maintenance; Cleaning The Condenser; Troubleshooting - Polar DB319 Manual De Instrucciones

Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Always wipe dry after cleaning.

Cleaning the Condenser

Periodic cleaning of the Condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
• The appliance is designed for display purpose only and not for storage.
• The appliance should be switched off when not in use.
• Carry out a manual defrost if excessive ice is present.
• Remove any water that may be present before usage.

Troubleshooting

If the machine malfunctions due to causes other than those listed or the proposed corrective actions do
not solve the problem please call a Polar agent or qualified technician.
Fault
The appliance is not
working
The appliance is not
cooling
The appliance is noisy
DB319_ML_A5_v1_20191128.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Coolant Leak
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
Appliance is not level
Appliance is too close to a wall or
other object
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Increase the gap between appliance and
obstacles/heat source
Call POLAR agent or qualified technician
Adjust position to make it level
Move to a more suitable location
UK
5
2019/11/28 14:36