Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SIMPLE™ KEY USER GUIDE
IMPORTANT NOTES
►
You MUST have at least one existing key that already works
with your vehicle in order to use the EZ Installer™. If you have
no working keys, return the Simple™ Key to the retailer where it
was purchased.
►
The emergency keyblade should be cut at your convenience.
This keyblade is inside the new Simple™ Key and can be used
to unlock the doors should the battery in the smart key fail. It
can be cut at any local hardware store.
►
Vehicle battery should be in good condition and fully charged
prior to pairing the new key. Turn off headlights, radio, A/C
fan, etc. to minimize battery draw during the process.
►
Do not use the EZ Installer™ while the vehicle is in motion.
Unplug it from the OBD port before driving the vehicle.
►
Only original remote features will work, regardless of buttons
included on the Simple™ Key. This key does not add remote
features that your vehicle did not have before.
►
For your security, a tamper-evident security label is installed
over the EZ Installer™ connector. If this label is missing,
damaged, or the word "VOID" appears on the EZ Installer™,
please exchange this Simple™ Key for a new one at the retailer
where it was purchased.
►
Before pairing, familiarize yourself with the Simple™ Key's
compatibility with the make, model, and year of your vehicle
on page 3.
LET'S GET STARTED
Simple™ Key requires two steps: "ACTIVATION" and "PAIRING." It is
important to follow these steps in order to successfully complete setup.
If you skip a step, the key WILL NOT work properly, and you'll have to
repeat the setup process.
Find your ACTIVATION CODE in the following chart by referencing
your vehicle's make, model, year and the button configuration of your
key's remote.
2
SIMPLE™ KEY USER GUIDE
COMPATIBILITY LOOKUP
Button Abbreviations:
S = Suspension, RS = Remote Start, T = Trunk, H = Hatch
MAKE/
YEARS
3 BUTTON
4 BUTTON
MODEL
CHRYSLER
T/S
200
2015-2017
133
300
2011-2014
113
DODGE
T/S
Charger
2011-2018
113
Journey
2011-2017
111
Ram
2013-2018
211
213
JEEP
T/S
Cherokee 2014-2018 223
Compass
2017-2018
143
Renegade 2015-2017
131
***NOTE: If your key has a red shell, use activation code 121.
Visit www.CarKeysExpress.com for the most up-to-date vehicle compatibility lookup.
STEP 1 (OF 2) KEY ACTIVATION
Follow the steps below to ACTIVATE your new key. Once you have
activated your key, follow STEP 2 (of 2) KEY PAIRING to pair the key to
your vehicle.
1.
First, simultaneously press the LOCK and PANIC buttons on the remote.
The light under the left bottom button will illuminate and stay on.
DIAL
5 BUTTON
POSITION
RS
T/S
H
134
5
114
1
RS
T/S
H
114***
1
112
1
212
214
2
RS
T/S
H
221
222
3
141
142
7
132
6
3
Tabla de contenido
