Klarfit Treppo Manual De Instrucciones página 34

EN
34
Folding the unit
1 Set both hydraulic rams to level 1.
2 Pull the locking pin (31) out of the device.
3 Hold the unit by the handle while sliding the support frame (24) with the
other hand towards the main frame (1).
4 Slide the locking pin (31) back into the opening of the main frame.
Note: Be careful not to squeeze your fingers when opening and closing the
device!
Open the device
Remove the locking pin (31) from the main frame (1). Open the frame and place
it on the floor. Align the openings on the main frame (1) with the opening on
the support frame (24) and slide the safety pin ( 31) through the openings.