LG PDRYCB300 Manual De Instalación página 18

Setting and using method
n For conventional thermostat signal input
CHANGE
OVER_SW
Thermostat Fan & System Switch
FAN MODE
[Auto / On] [Cool / Heat / Off]
- -
OFF
Cool
Auto
Heat
FAN
Cool
ON
Heat
Notes
• IDU Fan logic, depending on model selected, may delay IDU fan operation momentarily during a cold
start heat call. This function allows IDU coil to warm up prior to operating fan in some IDU models.
• Thermostats that use resistive anticipation are not supported at this time.
• Verify documentation of desired thermostat so that the logic is same as shown in the table above.
18 Dry contact for thermostat
H
24 V~
N
CN_Ther/Oper
CHANGEOVER_SW
RESET_SW
Operation
- 0
- 1
RT > SP 1
RT < SP 1
RT < SP 1
RT > SP 1
- 1
RT > SP 1
RT < SP 1
RT < SP 1
RT > SP 1
Thermostat
LG does not supply this section
(Field supply)
C R G W Y
CN_MODE
DISPLAY_LED
TEMP_SW
CN_OUT
Input
FAN HEAT
[G] [W]
- -
0 0
1 0
0 0
1 1
0 0
1 0
1 0
1 0
1 1
1 0
H H H
CN_WIND
SETTING_SW
IDU Response
COOL
[Mode / Thermal / Fan]
[Y]
- Disable Operation
0 Enable
1 Cool / On / On
0 Enable
0 Heat/ On/On
0 Enable
0 Fan/ Off/ On
1 Cool/ On/ On
0 Fan/ Off/ On
0 Heat/ On/ On
0 Fan/ Off/ On