SVBONY SV606 Guia Del Usuario página 11

After connecting with a genuine data cable, turn on the machine
and automatically enter the PC camera mode, click "amcap" to
open the PC software, select the second item Devices, check
the device name GENERAL-UVC as shown in the
figure:
"Options" as shown in the picture：
displayed. After the machine enters the PC mode, it only
supports the camera function. Only the switch button and the
fill light potentiometer are valid. Other buttons cannot be
used.
ATTENTION!
FCC Requirements:
•Products authorized under Part 15 using SDoC or Certification
require a label containing one of the following compliance
statements
(1)Receivers associated with licensed device service operaions:
This device complies with part 15 of the FCC Rules. Operation
is subject to the condition that this device does not cause
harmful interference.
(2)Stand-alone cable input selector switch:
This device complies with part 15 of the FCC Rules for use with
cable television service.
(3)All other devices:
•This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
CE Requirements:
•(Simple EU declaration of conformity) Hong Kong Svbony
Finally, check the third item "Preview" in
Before using this device, read this guide which
contains important operating instructions for
safe usage and control for compliance with
applicable standards and regulations.
The image can be
9