Tabla de contenido
Perform a complete visual inspection of the Ind. LuNAR RK200DTG3, for signs of mechanical damage, loose
connections or torn wires.
Check the connections of the incoming AC power source.
Trouble
ProSYS Configuration of detectors
fails/not accepted by the system
Tamper indication while working in
the BUS mode
30
Meaning
ID configuration
Disconnect all power sources, configure
problem
the desired IDs and reconnect power
again
Tamper connection
Verify that both DIP 8 and 9 are in ON
malfunction
position
Ind. LuNAR RK200DTG3 Installation Guide
Response
Tabla de contenido
