Kathrein UFO 386/TP Manual De Instrucciones página 24

If you have selected "Stuffing ON", the letter "S" will appear on the top right corner in the main menu.
The output symbol rate is settable in the operating mode "Stuffing" (see selection of the operation modes "PRBS"
and "Stuffing" with and without programme filter).
Note : Exit from the submenu is possible by pressing the
parameter. If the
the submenu "Prg. Filter" will be opened.
10. Transport stream processor : Programme filter
Input 1568
27,500 MS/s
Output S21
6,875 MS/s
Main menu
Selection of the operation mode programme filter "Prg. filter" is effected in the submenu "TP". Press the
access the TP submenu and use the " +" or "–" key to select the desired setting. Possible settings are :
"Prg. filter" "ON"/ "OFF". During selection of the programme filter "ON", the letter P will appear on the upper right side.
Exit from this submenu is only possible if the cursor is placed on the parameter "Stuffing". Use the "y y " or "z z " key
to select point "Stuffing" and return to the main menu with the
Note : If Stuffing is also switched on in the "Programme filter" operation mode, it is possible to change
the output symbol rate or QAM signal bandwidth (see choice of the output symbol rate in the
operation modes PRBS and Stuffing with or without programme filter).
It is possible to edit the programme filter no matter whether the programme filter is switched on or off (see settings
with USW 30). This allows for control or temporary deactivation of this function without a waiting period or need of
re-programming.
If the cursor is placed on the programme filter parameter "PRG filter" and the
"Programme filter" will be opened.
*** UFO 386/TP
Stuffing
Prg.-Filter
< Return:
Submenu TP
First of all, the active programme table of the transponder is read in and the submenu is displayed.
Note : The operation "Read-in programme table" can be interrupted with the submenu key
8
key is pressed while the cursor is on the parameter "Prg. Filter",
P
MHz
3/4 TP
306,00 MHz
64 QAM
***
OFF
ON
Submenu >
key when the cursor is on the "Stuffing"
*** UFO 386/TP
Stuffing
Prg.-Filter
< Return:
Submenu TP
key.
key is pressed, the submenu
Reading-in of the
programme table
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
....
Submenu TP
***
OFF
ON
Submenu >
key to
.