Kathrein UFO 386/TP Manual De Instrucciones página 23

Input 1568
27,500 MS/s
Output S21
6,875 MS/s
Main menu, display for SAT-PRBS
The operating mode "CW-Mode" can be used for output level measurement. Display for CW-Mode.
Input
Output S21
-.- - - MS/s
Main menu, display for CW
8. Selecting the position of the output spectrum
Input 1568
27,500 MS/s
Output S21
6,875 MS/s
Main menu
Position selection of the output signal is carried out in the submenu of the QAM stages parameter.
Access the submenu with the
Possible settings are "normal/inverse." Exit the submenu by pressing the
9. Transport stream processor : Stuffing
Input 1568
27,500 MS/s
Output S21
6,900 MS/s
Main menu
The selection of the "Stuffing" operating mode is carried out in the submenu TP. Access the submenu with
the key and carry out the desired seting with the "+" or "–" key.
Possible settings are : Stuffing "On"/ "Off".
Exit the submenu by pressing the
MHz
- - - TP
306,00 MHz
64 QAM
CW
306,00 MHz
64 QAM
MHz
3/4 TP
306,00 MHz
64 QAM
key and select the desired setting with the "+" or "–" key.
MHz S
3/4 TP
306,00 MHz
64 QAM
key.
*** UFO 386/TP
Modulation
Spectrum
< Return:
Submenu QAM stages, setting SAT-PRBS
*** UFO 386/TP
Modulation
Spectrum
< Return:
Submenu QAM stages, setting CW
*** UFO 386/TP
Modulation
Spectrum
< Return:
Submenu QAM stages
key.
*** UFO 386/TP
Stuffing
Prg.-Filter
< Return:
Submenu TP
***
SAT-PRBS
normal
Submenu >
***
CW-Mode
normal
Submenu >
***
SAT-Sig
normal
Main menu >
***
ON
OFF
Submenu >
7