Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. CHECKS TO PERFORM BEFORE STARTING
It is important to take into account the following recommendations before starting the generator.
All generators come without oil. The oil is an important factor that affects the performance and life
of the motor.
Use detergent oils for 4-stroke engines or API SE or higher (SG, SH, or SJ recommended).
We recommend you use SAE 10W-30 or SAE 10W-40 oil for general use at all temperatures. If you
use a monograde oil, choose the proper viscosity according to the temperature of the area where
you live.
Never used non-detergent or vegetable oils.
In addition, we must point out that running the motor without enough oil could seriously damage it.
Check the oil level while the motor is turned off. Make sure the motor is level and follow the steps
below: (See Fig. 1)
- Pull out the dipstick and clean it off with a cloth.
- Stick the dipstick back in the oil tank.
- Pull the dipstick out again and check the oil level on the dipstick. If the oil level is close to
or below the lower line on the dipstick, fill the motor with oil up to the upper line (lower edge
of the opening where you fill it with oil).
-20
-10
0
-4
14
32
C/ Oilamendi, 8 - 10
C/ Oilamendi, 8 - 10
01015 VITORIA - SPAIN
01015 VITORIA - SPAIN
Tel.: (34) 945 29 22 97
Tel.: (34) 945 29 22 97
FAX: (34) 945 29 22 98
FAX: (34) 945 29 22 98
www.ayerbe.net
www.ayerbe.net
10
20
30
40 ºC
50
68
86
104 ºF
Tabla de contenido
