Kohler Vanity 33562-0 Instrucciones De Instalación página 6

3. Remove/Adjust the Drawer
Alignment
To adjust the height and level the drawer, move the tabs underneath the front corners back or forward as needed.
For fine adjustment of the drawer face, loosen the screws behind the drawer face, then hold the drawer face level while
retightening the screws.
Removal
Fully extend the drawer.
From underneath, press the release latches toward the sides of the drawer.
Lift the front of the drawer to disengage from the rails.
Reinstallation
Fully extend both rails.
Rest the back end of the drawer onto the rails and align the rail hooks with the drawer holes.
Rotate the front of the drawer down onto the rails, engaging the latches with the rails.
Push the drawer closed to fully snap the latches into the rails and insert the rail hooks into the drawer holes.
Lightly lift the front of the drawer to verify that it is fully engaged with both rails. If not engaged, repeat the
"Reinstallation" procedure.
1470606-2-A
Tab
6
Screws
Hole
Kohler Co.