Reciclying And Disposing; Guarantee - Greencut GS7500 Manual De Instrucciones

• Store this tool in a place not accessible to children and safe in a manner that will not endanger anyone and that
is dry, clean and at a temperature between 0ºC and 45ºC.
• Always store the machine with the cutting element protection installed.
• If the machine is to be stored in an enclosed area, empty the fuel. If the fuel tank has to be emptied, this should
be done outdoors and in accordance with recycling regulations.
• Storage from 30 days without use: 1. Clean the outer parts thoroughly and apply a light layer of oil to all metal surfaces.
2. Remove the spark plug and put about 3 ml of oil into the cylinder through the hole in the spark plug. Slowly
pull the starter cable out 2 or 3 times so that the oil covers the inside of the engine evenly. Reinstall the
spark plug.
3. Blow dust/waste from the air filter element using compressed air if present.
4. Store the machine in a clean, dry, dust-free place.
5. Always make sure the chainsaw has the proper cover on the sword and chain assembly.

RECICLYING AND DISPOSING

When you decide to get rid of the machine, make sure to follow the local regulation.
Please help us to protect the environment and to preserve natural resources.
Get rid of the machine taking care of the environment. Do not simply throw it away in the domestic bin. Please
separate plastic and steel to recycle. Take this device to an authorised recycling centre. (Green point)
Petrol, used oil, oil/petrol mixtures, as well as objects stained with petrol (e.g.: cloths) must not be disposed of into the
domestic waste, pipes, soil, rivers, lakes or the sea. All objects stained with oil must be disposed of according to the
local regulations: take it to the most suitable recycling centre.
Package materials are recyclables. Please, throw them away on the appropriate rubbish bin.

GUARANTEE

GREENCUT guarantees a 2 years warrantee for all its products (valid in Europe). This guarantee is subject to the
purchasing date and taking into consideration the purpose of use of the product.
In order to claim your guarantee, you must present your receipt of purchase and its description, as well as the defective
product.
The guarantee does not cover wear and tear, especially of blades, blade elements, turbines, lighting sources, vent or
transmission belts, propellers, air filters, spark plugs and/or damages caused due to improper use of the machine,
especially due to failure of following the operation and maintenance instructions.
The guarantee is also excluded when non GREENCUT original or not-adequate assembly accessories or parts have
been used on the product.
In the event of a justified guarantee claim, we are authorised, as per our criteria, to repair or replace the faulty tool
free of charge. Claims beyond those described in this guarantee will be invalid.
77
EN