Safety Precautions; Maintenance And Storage - Flymo EASICUT 500CT Manual De Instrucciones

If not used properly this product can be dangerous. The warnings and safety instructions must be
followed to ensure reasonable safety and efficiency in using this product. The operator is responsible
for following the warnings and instructions in this manual and on the product. Never use the product
unless the guards provided by the manufacturer are in the correct position.
Explanation of Symbols on the product
Warning
Read the user instructions carefully to
make sure you understand all the
controls and what they do.
Do not operate in the rain or leave the
product outdoors while raining.
The use of eye protection is
recommended to protect against objects
thrown by the cutting parts.
General
1. Never allow children or people unfamiliar with
these instructions to use the product. Local
regulations may restrict the age of the operator.
2. Only use the product in the manner and for the
functions described in these instructions.
3. Never operate the product when you are tired, ill
or under the influence of alcohol, drugs or
medicine.
4. The operator or user is responsible for
accidents or hazards occurring to other people
or their property.
Battery
Cordless Battery Powered Products require special
care.
1. AVOID ACCIDENTAL STARTING
KEEP HANDS AND FINGERS AWAY FROM THE
SWITCH LEVER WHILE CARRYING THE
PRODUCT.
2. Always charge the product indoors and store in a
cool dry place - out of the reach of children.
3. Use only the charger provided with your unit.
Use of any other charger could permanently
damage the battery and the product.
4. Use the charger with standard domestic
household electrical outlets only.
5. Do not abuse the charger or charger cord.
6. Do not use the charger if the charger or charger
cord is damaged.
7. Use the charger indoors only.
8. Do not use the charger outdoors.
9. Store and charge this unit in a cool, dry well ventilated
location and out of the reach of children.
10. Do not charge the battery or use the unit in an
explosive or corrosive environment. Avoid areas
where flammable liquids or gases are present to
avoid creating a fire or explosion.
11. Do not attempt to repair the unit including the battery.
Nylon line replacement and cleaning the unit are the
only items suitable for user maintenance.
12. Do not insert any object into the motor area.
Keep free of debris to avoid overheating.
13. Do not incinerate or mutilate the battery. Batteries
contain hazardous chemicals. Dispose of properly.
ENGLISH - 1

SAFETY PRECAUTIONS

Preparation
1.
2.
3.
4.
Use
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Do not use stepladders whilst operating the
11. Remove the Battery Pack :-
-
-
-
-
-
-

Maintenance and storage

1.
2.
3.
4.
Always wear suitable clothing, gloves, and stout
shoes. The use of safety glasses is
recommended. Do not wear loose clothing or
jewellery which can be caught in moving parts.
Thoroughly inspect the area where the product
is to be used and remove all wires and other
foreign objects.
Before using the machine and after any impact,
check for signs of wear or damage and repair
as necessary.
Always ensure the hand guard supplied is fitted
before using the product. Never attempt to use
an incomplete product or one with an
unauthorised modification.
Use the product only in daylight or good artificial
light.
Avoid operating your product on a wet hedge,
where feasible.
Know how to stop the product quickly in an
emergency.
Never hold the product by the guard.
Never operate the product with damaged guards
or without guards in place.
Remove Battery Pack before passing product to
another person.
Avoid operating while people especially children
are nearby.
Whilst using the product always be sure of a
safe and secure operating position. Do not
overreach. Keep proper footing and balance at
all times.
Keep hands and feet away from the cutting
means at all times and especially when
switching on the motor.
product.
before leaving the product unattended for any
period;
before clearing a blockage;
before checking, cleaning or working on the
appliance;
if you hit an object. Do not use your product
until you are sure that the entire product is in a
safe operating condition;
if the product starts to vibrate abnormally.
Check immediately. Excessive vibration can
cause injury.
before passing to another person.
Keep all nuts, bolts and screws secure to be
sure the product is in safe working condition.
Replace worn or damaged parts for safety.
Be careful during adjustment of the product to
prevent entrapment of the fingers between
moving blades and fixed parts of the machine.
After use the product should be stored using the
blade cover provided.