Cleaning And Maintenance - Chicco Scaldabiberon Pappacalda Manual De Instrucciones

• Warning: If the feeding bottle is left into the equipment for more than 15 minutes, the temperature
of the food inside the feeding bottle may reach a temperature of over 50°C. Always check that the
temperature of the food before feeding baby.
HOW TO WARM UP BABY FOOD JARS
• Repeat the operations indicated at the beginning of the "How to Prepare the Equipment" para-
graph.
• Insert the specifi c baby food jar support into the chamber (if it is not already present).
• Remove the lid and any labels from the baby food jar. Lift the baby food jar support and, after insert-
ing the jar, place the support inside the feeding bottle warmer. Ensure that the level of the water
contained in the chamber does not exceed the upper rim of the jar, and that it does not spill out of
the rim of the feeding bottle warmer.
• Place the feeding bottle warmer onto a fl at, stable surface, and connect the plug to a mains socket.
• Select the baby food jar warming mode, positioning the lever of the selector to the right, pointing to the
icon "baby food jar". The red warning light will indicate that the equipment is warming up the jar.
• After approximately 5 minutes, check the temperature of the food inside in the jar. If the food is at
the correct temperature, switch off the feeding bottle warmer, turning the ever of the selector to the
central position. If the temperature is still too cold, continue the warming up cycle, taking care to
check often the temperature of the blended food. When the equipment emits two short beeps, the
red warning light switches off and the green warning light switches on the warming cycle is ended.
• Warning: The feeding bottle warmer must always be switched off and allowed to cool down one
hour of continuous operation.
• Warning: when the baby food jar warming mode is selected, the temperature of the food inside the
jar may reach a very high temperature (even higher than 70°C). Always check that the temperature
of the food before feeding baby.
• To switch off the feeding bottle warmer at any time, move the selector lever to the central position,
and disconnect the power cable's plug from the mains socket.
• Warning: During the warming up cycle, it is recommended to often stir the jar's content, in order to
homogenise the temperature.
• Warning: Before feeding baby, it is recommended to:
• a) Dry the baby food jar thoroughly.
• b) Stir the jar's content for a few seconds, in order to homogenise the food temperature
• c) Always check that the temperature of the food is not too hot before feeding baby (by pouring a
few drops of liquid on the inner of part your wrist).
• To remove the jar from the chamber more easily, use the specifi c baby food jar support.
Warning:
• Always let the feeding bottle warmer cool down completely before starting a new warming cycle.
BEFORE FEEDING BABY, ALWAYS CHECK THE TEMPERATURE OF THE WARMED UP FOOD.
V. CLEANING AND MAINTENANCE
After use:
• Disconnect the power cable's plug of the feeding bottle warmer from the mains socket. Allow the
feeding bottle warmer to cool down completely. Remove any residual water from the chamber, then
dry the feeding bottle warmer thoroughly, and store it in a clean, dry place.
10