Step 5-Completing The Installation; Troubleshooting Guide - MESTIC RTA-2500 Manual

COMPLETING THE INSTALLATION

STEP 5-COMPLETING THE INSTALLATION

To complete the installation and system checkout requirements, the following
steps must be performed.
1. Check the thermostat position. Make sure the thermostat is routed
through the holding guide and is not touching any metal surface.
2. Secure the ceiling grille to the ceiling assembly wind-path with 4
screws. (see Figure 10).
3. Install the healthy filter and air intake grill. Press "PUSH" and lock
with clasps.
4. Switch on the power supply and check the unit work or not.
5. Once the indoor unit is assembled, if the gap between the panel
and the top of vehicle is not even, please ask the manufacturer to
adjust it according to the assembly status.
28
TROUBLESHOOTING

TROUBLESHOOTING GUIDE

If you have problems with your recreational vehicle air conditioner, check this guide before contacting your service
representative.
29