Inserting The Batteries - LaserLiner CombiCross-Laser 5 Manual De Instrucciones

Inserting the batteries

1
Open the battery compartment (9) and
insert the batteries in accordance with
the installation symbols, ensuring the
correct polarity.
Horizontal and vertical levelling
2
Turn the transport fastener (2) clockwise and release the pendulum lock.
The lasers are now automatically aligned by the pendulum system and the
horizontal laser lights constantly. The lasers can be switched on and off with
the H and V buttons. It is now ready for levelling in the horizontal or vertical
plane.
Switch on 1x
device
!
The operating time is greatly increased by switching off unnecessary
laser lines.
If the device is too far off the horizontal (more than 2°), the lasers
!
will blink. Align the device using the adjustable feet (6) or place
on a more level surface. The round vial (8) is provided as an aid
to alignment.
Positioning laser lines
3
The top section of the laser unit can be turned on the plinth to align the
lasers approximately. Precise positioning can then be done with the Vernier
adjustment (3). The adjustable feet (6) allow the device to be positioned on
sloping surfaces.
12 GB
V V
1x
V
1x 1x
V H
1x